The ultrasonic processor UP100H (100W, 30kHz) is the perfect device for the sonication of small and medium size lab samples. This compact, yet powerful, lab homogenizer is commonly used for sample preparation, such as emulsifying, dispersing, dissolving and cell disruption.
The ultrasonic processor UP100H (100 watts, 30kHz) has the same compact and ergonomic design as the UP50H (50 watts, 30kHz) but it comes with twice the ultrasonic power. At 1.1kg, it is lightweight in the hand. Of course, an operation at a stand is possible, too. The ultrasonic generator and the transducer are combined in one unit, so that there are no hassles with connecting cables. One power supply cable – that’s all. This device is most suitable for the ultrasonication of very small as well as medium-sized samples. With the use of the sonotrode MS10 the range of application expands to the sonication of volumes of up to 500ml. Therefore, this ultrasonic device is mainly used for the preparation of samples in the lab, such as:


- Emulsifying (mixing of immiscible liquids) 
- Dispersing (mixing of powders into liquids) 
- Homogenizing and disintegration 
- Cell disruption (lysis) and extraction 
- Deagglomeration of nanomaterials 
- Degassing 

 
 
Technical data                                                                              
Power 100 W
Power control amplitude 20-100%
Pulse range 0-100%
Operating frequency 30kHz
Dimensions (LxWxH): 185x130x85mm
Weight 1.1 kg
Power supply 230 Volts, AC, single phase, 1A, 50-60Hz
Sonotrode Diameter (mm) Length (mm) Sample volume
MS0.5 0.5 80 0.01ml up to 0.5ml
MS1 1 80 0.1ml up to 5ml
MS2 2 80 2ml up to 50ml
MS3 3 80 5ml up to 100ml
MS7 7 80 10ml up to 250ml
MS7D 7 80 for closed systems
MS7L2D 7 160 for closed systems
MS10 10 80 20ml up to 500ml
 
 
   
up100h device

UP100 Accessories


MS0.5

Sonotrode, made of titanium, Ø0.5mm, approx. length 80mm, for samples from 0.01ml up to 0.5ml


MS1
Sonotrode, made of titanium, Ø1mm, approx. length 80mm, for samples from 0.1ml up to 5ml

 

MS2

Sonotrode, made of titanium, Ø2mm, approx. length 80mm, for samples from 2ml up to 50ml

 

MS3

Sonotrode, made of titanium, Ø3mm, approx. length 80mm, for samples from 5ml up to 100ml

 

MS7

Sonotrode, made of titanium, Ø7mm, approx. length 80mm, for samples from 10ml up to 250ml

 

MS7D

Sonotrode, made of titanium, Ø7mm, approx. length 80mm, with seal for closed systems

up100h 05 p0500 

MS7L2D

Sonotrode, made of titanium, Ø7mm, approx. length 160mm, with seal for closed systems

 

MS10

Sonotrode for UP100H only, made of titanium, Ø10mm, approx. length 80mm, for samples from

20ml up to 500mlSonotrode for UP100H only, madeof titanium, Ø10mm, approx. length 80mm, for samples from 20ml up to 500ml

 

D7K

Flow cell, made of stainless steel, with cooling, including fast connection kit, for fluids, autoclavable, for operation with MS7D, volume approx. 13ml

 

GD7K

flow cell made of glass, for 50-100 watts, with cooling, including fast connection kit, for fluids, autoclavable, for operation with MS7D (or with MS7L2D in combination with NSA1), volume approx. 80ml

 

NSA1

Adapter for standard flask-neck, vertically adjustable, suitable for MS7L2D in combination with GD7K

 

T1up100h cooled p0500

Timer, from 00:00 to 99:59 (min:sec)

 

UPC-L

PC-control (lab version) with power recording, consisting of interface box (aluminium, 105x80x30),

connection cable leading to the 9-pin DSUB socket (RS232) at the PC, software for Windows95/98/NT/XP®

 

UPCT-L

PC-control (lab version) with power and temperature recording, consisting of interface box (aluminium, 105x80x30),

connection cable leading to the 9-pin DSUB socket (RS232) at the PC, software for Windows95/98/NT/XP®

 

PowMet230

Power meter PowMet230, versatile, for display of current power, cumulated energy and cumulated operation time, 230V~1P, 50-60Hz, safety plug: European standard type

 

ST1-16

Stand, Ø 16mm, made of stainless steel, base length 300mm, width 150mm, height 600mm

 

STH-16

Fixture for UP50H or UP100H, for stand Ø 16mm

 

ST1-Clamp

Clamp for use with stand ST1-16

 

LabLift

LabLift for the easy positioning of samples under the ultrasonic probes to control immersion depth, stainless steel, footprint 100mm x 100mm, adjustable height: 50 to 125mm

 

SB2-16

Sound protection box, with vertically adjustable table and Ø 16mm stand bar, for UP50H or UP100H